Marine Oil Cooler U Type Heat Exchanger , Fourth System Horizontal Tube Evaporator

Marine Tube Condensing Unit

Shell and Tube Evaporator and Condenser

1, the heat transfer area is wide: the cooler of the heat pipe with copper pipe design, the contact area is

wide, so the heat transfer effect than the average smooth heat transfer tube to high.

2, good heat transfer: This series of copper tube is directly rotary copper processing, so that the

integration of heat transfer tube, so good heat transfer and indeed, there is no loss of solder joints

caused by poor heat transfer.

3, can be suitable for large flow: reduced number of heat transfer tubes, the use of smooth fluid area

increases, and can prevent the pressure loss. Inside with a baffle guide flow, can produce bending flow,

growth process, play a role.

4, a good heat transfer tube: good thermal conductivity of 99.9% copper, the most suitable for the cooling

of the cooling tube.

5, no oil: the board and the body with the integration of the design, you can avoid water and oil mixed with

the troubles at the same time in the factory before the airtight test is indeed close, it can achieve the

purpose of leakage.

6, easy assembly: foot can be free to turn 360 degrees, for the body to replace the direction and angle of

the assembly, through the foot can be directly welded in the machine or tank any location, both

convenient and simple.

7, spiral guide plate to guide the oil into a spiral continuous uniform flow, to overcome the traditional

folding heat generated dead ends, high heat transfer efficiency, pressure loss.

8, the flow of two processes and four processes, the flow of large flow (baffle large lead) small flow (baffle

small lead), variety, to meet the various requirements.