Loose Flange Shell And Tube Water Cooled Condenser With R407c Refrigerant

Shell and Tube Type Water Cooling

High Pressure Heat Exchanger

Central Air Conditioning Four parts: Compressor, condenser, throttle, evaporator

The refrigerant circulates in these four parts, starting with the evaporator.

1, the refrigerant through the evaporator with the outside world when the high temperature of the air heat

exchange, so that low-temperature low-pressure liquid to absorb the heat outside the heat, the refrigerant

into low temperature and low pressure gas; outside the air heat due to the outer surface of the evaporator

and refrigerant Heat exchange, heat is sucked away, so hot air becomes cold air.

2, low-temperature low-pressure gaseous refrigerant and then through the compressor, the compressor

on the gaseous refrigerant compression, so that the refrigerant into high temperature and high pressure

gas.

3, high temperature and high pressure gaseous refrigerant through the condenser, when the temperature

of the refrigerant is higher than the outdoor temperature, so the condenser and the outside relative to the

lower temperature of the refrigerant heat exchange, this time is the air to absorb the refrigerant The

temperature of the.

So that the cooling of the refrigerant becomes high-pressure liquid at room temperature, and the outside

air absorbs heat and the temperature rises, which is why the air blown out of the air-conditioning outdoor

unit is hot.

4, high-pressure liquid at room temperature through the throttle valve, the role of throttle valve is to adjust

the flow, cooling buck. So after the throttle into a low temperature and low pressure gas.