|
Product Details:
|
| Refrigerant: | R22/R134a/R407C/R410A | Type: | Shell And Tube Type |
|---|---|---|---|
| Shell Material: | ABS | Cooling Capacity: | 18KW~4000KW |
| Refrigerating Medium: | Tap/underground/river/sea Water, Brine, Glycol/sulfate Solution | Connection Type: | Brass Brazing |
| High Light: | water to water heat exchanger,shell and tube exchanger |
||
Water Cooled Corrosion Resistant Shell and
Tube Heat Exchanger for Water Chiller
Water Cooled Corrosion Resistant Shell and Tube Heat Exchanger for Water Chiller is suitable for water
cooled unit, water source heat pump, air cooled pump and air cooled heat pump unit.
The product is applying for refrigerants of R22, R134a, R407C and R410A etc.
The referigerating medium is for tap water, underground water, river water and sea water or brine, water
and glycol solution, sulfate solution, etc.
For heat exchange tube, copper pipe, copper nickel alloy tube, aluminum brass tube, stainless steel tube,
etc. The shell raw material mainly are seamless steel tube, stainless steel pipe.
1, Heat exchange tube: four main tube type.
(1) ∅ within 3/8 "thread copper coil, it is mainly used for" U "type tube evaporator.
(2) ∅ within 1/2 "threaded straight copper tube, straight tube is mainly used for dry-type evaporator.
(3) ∅ 1/2 "corrugated straight stainless steel tube, straight tube is mainly used in food industry of dry
evaporator.
(4) ∅ 5/8 "inside outside screw wing efficient copper tube, it is mainly used for air precooling industry dry
evaporator.
2, shell raw material:
There are two of the major materials:
(1) # 20 seamless steel tube, mainly used for all kinds of load - more than 20 ℃ cold agent.
(2) 304/316 l stainless steel tube, it is mainly used for food and low temperature (below 25 ℃, higher than
40 ℃) of the refrigerant, 316 l can also be used for cooling load of the sulfate for industry.
3, interface:
U SHAPED TUBE DRY EVAPORATOR (SINGLE CIRCUIT)
CAPACITY: 120KW TO 270KW
| Models | QXU120S8 | QXU135S8 | QXU155S8 | QXU185S10 | QXU220S10 | QXU270S10 | ||
|
Rated data Refrigerant R22 ti=12°C te=2°C tu=7°C Dts=5°C |
Qn | KW | 120 | 135 | 155 | 185 | 220 | 270 |
| Kcal/h(×103 ) | 103.2 | 116 | 133.3 | 159 | 180 | 232 | ||
| Wn | m3 /h | 20.3 | 23.2 | 26.7 | 31.8 | 37.8 | 46.4 | |
| Wm | m3 /h | 25 | 28 | 30 | 41 | 43 | 65 | |
| Dpn | bar | 0.41 | 0.44 | 0.37 | 0.36 | 0.43 | 0.42 |
| Models | QXU120S8 | QXU135S8 | QXU155S8 | QXU185S10 | QXU220S10 | QXU270S10 | |
| Dimension(mm) | A | 1815 | 2115 | 2315 | 2320 | 2654 | 2654 |
| B | 219 | 219 | 219 | 273 | 273 | 273 | |
| C | 180 | 180 | 180 | 200 | 234 | 234 | |
| D | 1530 | 1830 | 2030 | 2000 | 2280 | 2280 | |
| E | 240 | 240 | 240 | 300 | 300 | 300 | |
| Vent | S1 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
| Outlet | S2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
| Connection | W(DN) | 80 | 80 | 80 | 100 | 100 | 100 |
| D1(mm) | 35 | 35 | 35 | 35 | 35 | 35 | |
| D2(mm) | 54 | 54 | 67 | 67 | 80 | 80 | |
| P(kg) | 145 | 155 | 163 | 232 | 279 | 289 | |
|
Qn-rated refrigerating capacity Wn-cooling water flow Wm-maximum cooling water flow Dpn-pressure drop of recirculating cooling water Dts-overheat temperature |
|||||||
CONDENSER SERIES SINGLE SYSTEM
CAPACITY: 40RT TO 60RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||
| D | T1 | T | A | C | E | |||||
| QXC40S10 | 40 | 15.12 | 273 | 1600 | 1750 | 120 | 273 | 85 | 172 | 31 |
| QXC45S10 | 45 | 17.01 | 273 | 1600 | 1750 | 120 | 273 | 85 | 180 | 35 |
| QXC50S10 | 50 | 18.90 | 273 | 2032 | 2182 | 120 | 273 | 85 | 209 | 38.5 |
| QXC55S10 | 55 | 20.79 | 273 | 2032 | 2182 | 120 | 273 | 85 | 217 | 42.5 |
| QXC60S10 | 60 | 22.68 | 273 | 2032 | 2182 | 120 | 273 | 85 | 224 | 46 |
| Model | S (Vent) |
P (fluoride inlet) Copper pipe diameter (inch) |
L(fluoride outlet) Copper pipe diameter (inch) |
W (standard port) | W (optional port) |
| FPT(inner pipe thread) | FPT(inner pipe thread) | FPT(inner pipe thread) | |||
| QXC40S10 | 3/8 | 1-5/8 | 1-1/8 | 3 | 2-1/2 |
| QXC45S10 | 3/8 | 1-5/8 | 1-1/8 | 3 | 2-1/2 |
| QXC50S10 | 3/8 | 1-5/8 | 1-1/8 | 3 | 2-1/2 |
| QXC55S10 | 3/8 | 1-5/8 | 1-3/8 | 3 | 2-1/2 |
| QXC60S10 | 3/8 | 1-5/8 | 1-3/8 | 3 | 2-1/2 |
CONDENSER SERIES SINGLE CIRCUIT
CAPACITY: 75RT TO 100RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||||
| D | T1 | T | A | C | E | H1 | H2 | |||||
| QXC75S12A | 75 | 28.350 | 325 | 2032 | 2485 | 120 | 360 | 180 | 350 | 240 | 335 | 57.2 |
| QXC80S12A | 80 | 30.240 | 325 | 2032 | 2485 | 120 | 406 | 180 | 350 | 240 | 343 | 61 |
| QXC85S12A | 85 | 32.130 | 325 | 2032 | 2485 | 120 | 406 | 180 | 350 | 240 | 350 | 64.1 |
| QXC90S12A | 90 | 34.020 | 325 | 2032 | 2485 | 120 | 406 | 180 | 350 | 240 | 364 | 68 |
| QXC95S12A | 95 | 35.910 | 325 | 2032 | 2485 | 120 | 406 | 180 | 350 | 240 | 372 | 72.1 |
| QXC100S12A | 100 | 37.800 | 325 | 2500 | 2966 | 120 | 406 | 180 | 350 | 240 | 379 | 76 |
| Model | S (Vent) |
P (fluoride inlet) Copper pipe diameter (inch) |
L(fluoride outlet) Copper pipe diameter (inch) |
W (standard port) | W (optional port) |
| FPT(inner pipe thread) | Male flange | Male flange | |||
| QXC75S12A | 3/8 | 2-1/8 | 1-3/8 | DN80 | DN100 |
| QXC80S12A | 3/8 | 2-1/8 | 1-3/8 | DN80 | DN100 |
| QXC85S12A | 3/8 | 2-5/8 | 1-3/8 | DN100 | DN100 |
| QXC90S12A | 3/8 | 2-5/8 | 1-3/8 | DN100 | DN100 |
| QXC95S12A | 3/8 | 2-5/8 | 1-3/8 | DN100 | DN100 |
| QXC100S12A | 3/8 | 3-1/8 | 1-5/8 | DN100 | DN100 |
COMPANY IMAGE
COOPERATED CLENTS
Contact Person: Mrs. Nichole Deng
Tel: 15527011936
Fax: 86-27-8337-2527
