Payment & Shipping Terms:
|Shell Material:||Seamless Steel Pipe||Cooling Capacity:||18KW~4000KW|
|Heat Exchange Tube:||Red Copper||Cover Material:||Carbon Steel|
tube and shell heat exchanger,
shell tube heat exchanger
Chiller Evaporator Shell and Tube Heat Exchanger
Air-cooled screw chiller because of its key components - the compressor used screw-type air-cooled
screw chiller, the unit from the evaporator out of the state of the gas refrigerant; compressed by the
compressor after compression, into a high temperature and high pressure state.
Compressed gas refrigerant, in the condenser, isostatic cooling condensation, after condensation into
liquid refrigerant, and then through the throttle valve to low pressure, into a gas-liquid mixture. Which low-
temperature low-pressure liquid refrigerant, in the evaporator to absorb the heat of cold matter, re-
become a gaseous refrigerant.
The gaseous refrigerant is reintroduced into the compressor via piping to start a new cycle. This is the
four cycles of the refrigeration cycle. It is also the main working principle of the screw chiller.
Chillers because of different forms of condensation so divided into air-cooled and water-cooled type of
The air-cooled chiller directly uses the air condenser on the unit to drain the heat into the air. Water-
cooled machines need to be circulated through external cooling water. Heat the heat through the cooling
tower or the cooling pool into the air.
The screw unit is a medium-sized refrigeration unit. Water condensers are usually used. The advantage is
that the cooling capacity is relatively high relative to air cooling. And by the environmental shadow is
small. Performance is more stable. And in the absence of water, or water is not convenient to the water will
be used in areas of air-cooled machines.
OIL COOLER CAPACITY 3RT TO 40RT
|Model||Refrig. ton (RT)||Refrig. ton (104kcal/h)||Dimension (mm)||Weight (kg)|
|Model||S (Oil vent)||
P1 (inlet/outlet oil vent)
Copper pipe external diameter (inch)
|W (inlet/outlet water vent)|
|FPT(inner pipe thread)||FPT(inner pipe thread)|